Description
New upgraded version. The previous sensor didn’t work well with some specific filaments. The new sensor is now using an optical sensor which is triggered by a simple mechanical lever. This sensor doesn’t care about the optical properties of the filament (it can be completely invisible) and cannot die because of mechanical wear.
IR Sensor Assembly:
Place the IR-sensor on the top of the Extruder-body and secure it with the M2x8.
Tighten the M2x8 screw, the sensor shouldn't be able to move, but be careful the PCB isn't indestructible ;)
Connect the cable, mind the correct orientation of the connector and wires.
Leave a slack behind the sensor like in the picture. Don't create too big loop as it might interfere with the frame. If needed adjust the length by gently pulling/pushing the cable
Package includes:
1 x Optical Filament Sensor
1 x Cable
1 x 7mm Steel Ball
1 x Magnet 20x6x2mm
1 x Magnet 10x6x2mm
1 x M3x18 Screw
1 x M3x10 Screw
1 x M2x8 Screw
2 x M3nS Nuts
2 x M3n Nuts
IR Sensor Assembly:
Place the IR-sensor on the top of the Extruder-body and secure it with the M2x8.
Tighten the M2x8 screw, the sensor shouldn't be able to move, but be careful the PCB isn't indestructible ;)
Connect the cable, mind the correct orientation of the connector and wires.
Leave a slack behind the sensor like in the picture. Don't create too big loop as it might interfere with the frame. If needed adjust the length by gently pulling/pushing the cable
Package includes:
1 x Optical Filament Sensor
1 x Cable
1 x 7mm Steel Ball
1 x Magnet 20x6x2mm
1 x Magnet 10x6x2mm
1 x M3x18 Screw
1 x M3x10 Screw
1 x M2x8 Screw
2 x M3nS Nuts
2 x M3n Nuts
Estimate shipping
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.